2016-2019 Mazda CX-3 Plug & Play Remote Start Kit (Push Button Start)

12Volt.Solutions

$349.99 $399.99
SKU: MAZ-3-M3

* * * IMPORTANT NOTE:  This kit will only work on vehicles with a Push Button Start ignition system. 

 

 

 

The ONLY 100% Plug & Play Remote Start Kit for the CX-3 in the World!                                           No cutting, No Splicing, No Bullsh*t !  

Our kit comes with an exclusive 12volt.Solutions Parking Light T-harness - no other kit has this this!

 

This kit only requires you to remove TWO screws from the underside of the steering column.. that's it!   No need to remove a bunch of panels from your vehicle and run wires to different area of the car!   THIS TRULY IS THE EASIEST MAZDA KIT TO INSTALL!  WE WILL PUT OUR KIT UP AGAINST ANY OTHER "KIT" OUT THERE!  

This is the best and most complete kit on the market, PERIOD!  With thousands of units sold, we can proudly stand behind that statement!  This kit requires a 2 stage programming method.  See the "Special Notes" section below for details.

 

 Details

    • NO DEALER ACTIVATION REQUIRED
    • 100% Plug & Play
    • Printed color instructions included
    • Complete Kit - nothing else needed
    • Compatible with our Long Range Remote Kits
    • Compatible with our Smart Phone Module

     

     Requirements

    • 2016 2017 2018 2019 Mazda CX-3
    • Push Button Start Ignition
    • Automatic Transmission
    • Stage 2 Programming Required (see "special notes" below)

     

     Operation

    • To Start:  Press the lock button 3 times on factory key FOB
    • To Stop:  Press the lock button 3 more times while engine is on
    • Parking Lights will illuminate
    • Run Time is 15 minutes
    • All doors, and hood must be closed
    • The vehicle will NOT shut off when the door is opened.  You can "get in and go" without having to restart your vehicle.

     

     Special Notes

      • ! WARNING !

      ! DISCONNECT THE BATTERY BEFORE BEGINNING INSTALLATION !


         

        • PARKING LIGHT ACTIVATION:  Parking lights are optional and not required for remote start operation.  To have the parking lights illuminate during remote start operation, you will need to connect our plug & play HLSA adapter at the headlight switch

         

        • STANDARD STAGE 2 PROGRAMMING PROCESS -  This vehicle requires a 2 stage programming process.  This means, you will install the kit, program the module to the vehicle and then remove the module and send it back to us - this is Stage 1. YOU WILL STILL BE ABLE TO DRIVE YOUR VEHICLE WHILE THE MODULE IS DISCONNECTED BY USING THE SUPPLIED "DRIVE TIME CAP"

         

        • We do include a pre-paid label for you to send the module back for 2nd stage programming
         
        • We complete Stage 2 and ship it back out on the same day we receive it from you.  When you receive the module back from us, you simply plug it back into the vehicle, and you're good to go!

         

        This kit only requires you to remove TWO screws from the underside of the steering column.. that's it!   No need to remove a bunch of panels from your vehicle and run wires to different area of the car!   THIS TRULY IS THE EASIEST MAZDA KIT TO INSTALL!  WE WILL PUT OUR KIT UP AGAINST ANY OTHER "KIT" OUT THERE!

         

        Don't want to send the module back for Stage 2?  NO PROBLEM!

        As an alternative to the Standard Stage 2 Programming Process, we offer an option where we can remote into your computer and do all the programming from our facility which eliminates you having to send the module back to us.  This will save a lot of time and prevent the risk of lost packages.

        To use this option, you will need to add the Web Programmer - The Magic Box to your cart when purchasing your remote start kit.

         

         Resources

        Web Programmer - The Magic Box

        Customer Reviews

        Based on 31 reviews Write a review