2010-2012 Honda Accord Crosstour Plug & Play Remote Start Kit



Plug & Play Remote Start System



NOTE:     This application requires a 2 stage programming process.  This means, that you will install the kit, program the module to the vehicle and then remove the kit (harness & module) and send the module back to us - this is Stage 1.
We typically complete Stage 2 and ship it back out on the same day we receive it from you. We return ship it at our expense using Priority mail.  When you receive the module back from us, you simply plug it back into the vehicle.  Programming is now complete and you can test the remote start!
Please contact us if you have questions abut this process.



NO DEALER ACTIVATION REQUIRED!  No special connectors.  No spending hours trying to figure out a wiring diagram.   This remote start system was designed to make the installation and programming process as easy, and as fast as possible.  This application is Plug and Play and is a very easy, and straight forward process.  

INSTALLATION TIME:  20-25 minutes


Will this work with my vehicle?

  • 2010-2012 Honda Accord Crosstour
  • Will work on key start only
  • Vehicle must have lock/unlock buttons on factory key fob
  • Automatic transmissions only


Operation of Remote Start

  • On the Factory Key FOB, press the lock button 3 times
  • 3 more presses on the Key FOB will turn the Remote Start off
  • Parking Lights will illuminate when remote start is active (see note below)
  • Remote Start run time is set to 15 minutes


Special notes about this Remote Start Kit

  • One wire will need to be connected to get the parking lights to illuminate during remote start.  Pictures of the connection will be provided on install guide.  
  • Lock wires will need to be hooked up if using our phone module or long range remote kits.

Whats included

  • Plug & Play harness
  • Remote Start Module
  • Zip Ties
  • Instructions
  • Small Padded Envelope
  • Support Contact
  • Warranty