2017-2021 Ford Super Duty High Idle Kit - Selectable 1200, 1400, 1700 RPM

12Volt.Solutions

$99.99 
SKU: FRD-High Idle

The ONLY User Selectable Plug & Play High Idle Kit for the 2017+ Ford Super Duty Trucks!

Details

    • NO DEALER ACTIVATION REQUIRED
    • Printed instructions included
    • Complete Kit - nothing else needed
    • User Selectable between 1200, 1400, 1700 RPM
    • New design to allow the use of the OEM accessory wiring pigtail

    Requirements

    • 2017 2018 2019 2020 2021 Ford Super Duty Trucks (F-250 F-350 F-450 F-550)
    • Diesel engine ONLY

    Special Notes

    • If High Idle is canceled for any reason, the ignition will need to be cycled before it can be engaged again
    • * * * TIP - Apply parking brake before exiting the truck and High Idle mode will engage when you use remote start if the proper conditions are met * * *

    All of the following conditions must be met for the High Idle Kit to operate properly

        • Engine coolant temp must be above 20 degrees F
        • Transmission temp must be above 20 degrees F
        • Engine must be at stable RPM speed
        • Vehicle speed is zero
        • Vehicle must be in park or neutral
        • Foot off gas pedal
        • Foot off brake pedal
        • Parking brake must be engaged

        Any of the following will disable/cancel the High Idle operation

        • Engine temp exceeds 234 degrees F
        • Transmission temp exceeds 240 degrees F
        • Gas pedal is pressed
        • Brake pedal is pressed
        • Parking brake is disengaged
        • Vehicle is taken out of park or neutral
        • Certain engine trouble codes are present

        Customer Favorites

        The ONLY User Selectable Plug & Play High Idle Kit for the 2017+ Ford Super Duty Trucks!

        Details

          • NO DEALER ACTIVATION REQUIRED
          • Printed instructions included
          • Complete Kit - nothing else needed
          • User Selectable between 1200, 1400, 1700 RPM
          • New design to allow the use of the OEM accessory wiring pigtail

          Requirements

          • 2017 2018 2019 2020 2021 Ford Super Duty Trucks (F-250 F-350 F-450 F-550)
          • Diesel engine ONLY

          Special Notes

          • If High Idle is canceled for any reason, the ignition will need to be cycled before it can be engaged again
          • * * * TIP - Apply parking brake before exiting the truck and High Idle mode will engage when you use remote start if the proper conditions are met * * *

          All of the following conditions must be met for the High Idle Kit to operate properly

              • Engine coolant temp must be above 20 degrees F
              • Transmission temp must be above 20 degrees F
              • Engine must be at stable RPM speed
              • Vehicle speed is zero
              • Vehicle must be in park or neutral
              • Foot off gas pedal
              • Foot off brake pedal
              • Parking brake must be engaged

              Any of the following will disable/cancel the High Idle operation

              • Engine temp exceeds 234 degrees F
              • Transmission temp exceeds 240 degrees F
              • Gas pedal is pressed
              • Brake pedal is pressed
              • Parking brake is disengaged
              • Vehicle is taken out of park or neutral
              • Certain engine trouble codes are present

              Customer Reviews

              Based on 5 reviews Write a review