2020-2022 Subaru Legacy Plug and Play Remote Start Kit (Key Start)

12Volt.Solutions

 

Sorry, this item is out of stock

IMPORTANT NOTE: One key will need to remain in our module for the remote start to work - see the Special Notes below

No cutting, No Splicing, No Bull$%!#

30-60 MINUTE INSTALLATION!

Kit Details

  • NO DEALER ACTIVATION REQUIRED
  • 100% Plug & Play
  • Range is the same as your OEM Key FOB
  • Complete Kit - nothing else needed
  • Compatible with our Add-On Long Range Remote Kit
  • Compatible with our Add-On App Module
  • Remote Start functionality is activated by press the lock button 3 times on the factory key fob


Requirements & Compatibility

  • 2020 2021 2022 Subaru Legacy
  • Key Start Ignition only
  • Automatic Transmission only
  • 1 key will be required


Operation of System

  • To Start: Press lock 3 times on the OEM key FOB
  • To Stop: Press lock 3 times on the OEM Key FOB
  • Parking Lights will illuminate during remote start mode
  • Run time is 15 minutes
  • All doors, hood and hatch/trunk must be closed
  • The vehicle will NOT shut off when the door is opened - You can get in and go without having to restart your vehicle.


Special Notes

  • Range is the same as your OEM key FOB
  • Vehicle will not shut off when a door is opened
  • No Stage 2 programming required
  • 100% Plug & Play design! No wires to cut or splice!
  • One key will remain in our module - this is done in a safe manner so your vehicle can not be stolen or unlocked. The battery will be removed so the remote will be "dead" and only the start signal is used during the crank cycle.
  • The key can be retrieved at any time and will be fully functional when the battery is placed back in it.
  • THE KEY DOES NOT GET WRAPPED! Instead, it gently gets placed in a key box.


    Remote Start Kit Options and Range


    Standard Kit

    Remote Start works by pressing the lock button 3 times on your OEM key FOB. Range is the same as your OEM Key

    Long Range Remotes

    Remote Start, Lock, and Unlock your vehicle with our 1-button remote. This Remote Kit includes one 2-way remote with audible and visual feedback, and one 1-way remote. Range is up to 1 mile, depending on surroundings/environment. Click here for more info about or LRR-P Remote Kit

    App Module

    Remote Start, Lock, Unlock, Trunk Pop(if supported by firmware), GPS locate, Run Time display, and more. Range is Unlimited. Click here for more info about the App Module

        Customer Favorites

        IMPORTANT NOTE: One key will need to remain in our module for the remote start to work - see the Special Notes below

        No cutting, No Splicing, No Bull$%!#

        30-60 MINUTE INSTALLATION!

        Kit Details

        • NO DEALER ACTIVATION REQUIRED
        • 100% Plug & Play
        • Range is the same as your OEM Key FOB
        • Complete Kit - nothing else needed
        • Compatible with our Add-On Long Range Remote Kit
        • Compatible with our Add-On App Module
        • Remote Start functionality is activated by press the lock button 3 times on the factory key fob


        Requirements & Compatibility

        • 2020 2021 2022 Subaru Legacy
        • Key Start Ignition only
        • Automatic Transmission only
        • 1 key will be required


        Operation of System

        • To Start: Press lock 3 times on the OEM key FOB
        • To Stop: Press lock 3 times on the OEM Key FOB
        • Parking Lights will illuminate during remote start mode
        • Run time is 15 minutes
        • All doors, hood and hatch/trunk must be closed
        • The vehicle will NOT shut off when the door is opened - You can get in and go without having to restart your vehicle.


        Special Notes

        • Range is the same as your OEM key FOB
        • Vehicle will not shut off when a door is opened
        • No Stage 2 programming required
        • 100% Plug & Play design! No wires to cut or splice!
        • One key will remain in our module - this is done in a safe manner so your vehicle can not be stolen or unlocked. The battery will be removed so the remote will be "dead" and only the start signal is used during the crank cycle.
        • The key can be retrieved at any time and will be fully functional when the battery is placed back in it.
        • THE KEY DOES NOT GET WRAPPED! Instead, it gently gets placed in a key box.


          Remote Start Kit Options and Range


          Standard Kit

          Remote Start works by pressing the lock button 3 times on your OEM key FOB. Range is the same as your OEM Key

          Long Range Remotes

          Remote Start, Lock, and Unlock your vehicle with our 1-button remote. This Remote Kit includes one 2-way remote with audible and visual feedback, and one 1-way remote. Range is up to 1 mile, depending on surroundings/environment. Click here for more info about or LRR-P Remote Kit

          App Module

          Remote Start, Lock, Unlock, Trunk Pop(if supported by firmware), GPS locate, Run Time display, and more. Range is Unlimited. Click here for more info about the App Module

              Customer Reviews

              Based on 4 reviews Write a review